Double impeller leaching tank
Working principle
With dual impellers rotating and agitating, ore pulps move downward and then diffuse along damping plate. Air is fed in tank from the lower end of shaft, and blended with ore pulps to form uniform suspending mixed liquid.
Product Advantages
Smooth movement of ore flow, even pulp mixture, less power consumption;
The air enters the tank through the transmission hollow shaft, and the air disperse evenly with the blade agitation;
Compact structure, easy to maintain;
Hollow shaft is ventilated to the bottom end, and the air enters into the tank with uniform distribution and small bubbles;
Adopt two new impellers, the agitation tank is featured with large impeller diameter, low rotation speed, small power consumption, which can reduce the wear of carbon;
Moderate agitation intensity, and uniformly distribution in pulp concentration and fineness, which can improve the leaching rate of cyanidation and the adsorption rate of carbon.
The impeller of this leaching tank is lined with wear-resistant rubber, low rotation speed and long service life.
DOUBLE IMPELLER HIGH EFFICIENCY LEACHING TANK
|
Model |
Size of the tank D*L |
Effective capacity (m3) |
Revolution of impeller（r/min） |
Diameter of impeller (mm) |
Diameter of feeding pipe (mm) |
Diameter of discharging Pipe (mm) |
Planetary cycloid reduction box |
Weight (kg) |
||
|
Model |
Speed ratio |
Motor Power (kw) |
||||||||
|
φ2.5*2.5 |
2000*2500 |
6 |
65 |
800 |
2-φ133 |
2-φ133 |
XLD2.2-4-29 |
29 |
2.2 |
2800 |
|
φ2.5*3.15 |
2500*3150 |
13 |
57 |
935 |
2-φ125 |
2-φ125 |
XLD2.2-4-29 |
29 |
2.2 |
3120 |
|
φ3.0*3.15 |
3000*3150 |
18.93 |
51 |
1130 |
2-φ150 |
2-φ150 |
XLD4-5-35 |
35 |
4 |
5300 |
|
φ3.15*3.55 |
3150*3550 |
24 |
43 |
1260 |
2-φ150 |
2-φ150 |
XLD4-5-35 |
35 |
4 |
5488 |
|
φ3.5*3.5 |
3500*3500 |
29 |
46 |
1310 |
2-φ150 |
2-φ150 |
XLD4-5-35 |
35 |
4 |
6646 |
|
φ3.55*4.0 |
3550*4000 |
35 |
36.3 |
1310 |
2-φ150 |
2-φ150 |
XLD4-5-35 |
35 |
4 |
7820 |
|
φ4.0*4.5 |
4000*4500 |
50 |
33.5 |
1500 |
2-φ150 |
2-φ150 |
XLD7.5-7-43 |
43 |
7.5 |
8285 |
|
φ4.5*5.0 |
4500*5000 |
71.67 |
33.5 |
1750 |
2-φ159*6 |
2-φ159*6 |
XLD7.5-7-43 |
43 |
7.5 |
10800 |
|
φ5.0*5.6 |
5000*5600 |
98 |
31 |
1900 |
2-φ159*8 |
2-φ159*8 |
XLD11-8-47 |
47 |
11 |
13340 |
|
φ5.5*6.0 |
5500*6000 |
112 |
31 |
2100 |
2-φ159*8 |
2-φ159*8 |
XLD11-8-47 |
47 |
11 |
18745 |
|
φ7.5*8.0 |
7500*8000 |
268.6 |
21 |
2900 |
2-φ159*8 |
2-φ159*8 |
XLD22-10-47 |
47 |
22 |
32796 |
|
φ8.0*8.5 |
8000*8500 |
342 |
16.4 |
3200 |
2-φ159*8 |
2-φ159*8 |
XLD22-11-59 |
59 |
22 |
42467 |
In the gold cyaniding process, leaching agitation tank is applied to leach and carbon-absorb ore pulps whose fineness is -200 meshes and whose density is less than 45%. Under similar circumstance, it is also applied to agitation and leaching in metallurgy, chemical and light industry.
